Some John Deere machines require special requirements to mount a winch.

Don't forget to get your KFI Winch for a seamless install.

Below is the "Note A" options for the following machines

This will mount either in the front or the rear of the machine. If you want to have it mountable in either place you will need a second quick connect cable and receiver.

NOTE A = Will only work as a front 2" receiver hitch #100720 and using receiver hitch winch mount #100620.

You will also need #QC-20 for the winch and the Quick Connects needed to get to your desired winch contactor location.  One for the front and one for the back of the UTV if desired.  #QC-48 (48" Quick Connect), #QC-96 (96" Quick Connect) or #QC-120 (120" Quick Connect)

In this package you will get:

(1)  John Deere Gator Front or Rear 2" Receiver 100720

(1) KFI 2" Multi-Mount 100620

(1) 5/8" Pin ATV-20PIN

(1) 20" Quick Connect Winch Power Cable QC-20

(1) of the following depending on your selection

      48" Quick Connect Winch Power Cable QC-48

     96" Quick Connect Winch Power Cable QC-96

   120" Quick Connect Winch Power Cable QC-120

------------------------------------------------------------------------------------------------

Brand New KFI John Deere Gator Front or Rear 2" Receiver Hitch

**Only works on the front of all Gator HPX

**Only works on the front of the following Gator XUV's

• 2007-2010 XUV 620i and 850D

**Only works on the rear of some of the Traditional Series (T-Series) with a 4-bolt pattern of approximatly 1-3/4" x 3-3/8"

Specifications:

• Will work on the front or the rear of your Gator.
       Note: When your ball receiver is installed on the rear your Traditional 4x2 or 6x4, the tailgate may hit during dumping.  We also have a longer extended version that will enable you to keep the ball receiver installed during dumping.
• 100% MADE IN USA.
• Constructed of 3/16" Grade 50 steel.
• Unlike all other hitch competitors, our hitches are metal bead blasted before they are powder coated for the best possible finish prep.
• Powder coated black for supreme durability.
• Very easy to install.
• All mounting hardware included.
• Complete installation instructions included.
• Satisfaction guaranteed.

 ---------------------------------------------------------------------------------------------

Brand New "KFI" 2.00" Receiver Winch Mount for the following winches:

Note: This mount requires a roller fairlead bracket that comes with most of the winches out there. 
If your winch kit did not come with a fairlead bracket you will need the following:

• For most winches with a 4-Hole 3.00" x 4.875" (STANDARD) KFI #100495
• For most winches with a 4-Hole 3.00" x 6.600" (WIDE) KFI #100695
• For WARN VRX or AXON winches with a 3.00" x 4.875" (STANDARD) KFI #101715 

------------------------------------------------------------------------------------------------

Brand New 20" Quick-Connect (Winch End) and 1 of the Battery / Contactor End 

Specifications:

• 6 Gauge Wire
• Connects to the winch motor end
• Eyelet ends
• Dust and mud cap
• Rubber end connector covers
• Satisfaction guaranteed